Wood Working Tools & Industrial Blades

Made from quality materials and complete with its own canvas storage wallet. Bevel edged chrome vanadium blades, hardened, tempered, ground and polished.Comfortable bi-material handles with impact resistant end caps.

Heavy duty two speed breast drill with a heavy cast construction and enlosed gearing. Fitted with a three jaw keyless 10mm chuck and supplied with two removable wooden handles. The plate is pressed against the chest to force the drill point into the work

Beechwood Marking Gauge For marking wood and laminate parallel to edge, prior to cutting, sawing or chiselling. With plastic thumbscrew. Capacity: 0 - 150 (6”).

Can be used independently as a ‘quick check’ tool or to convert a rule or square into a precision angle finder. High strength built-in ceramic magnet with vee groove for use on bars and pipes. Accuracy ± 0.5%. For the most accurate readings it is recommended that the angle finder is attached to a steel rule or square by means of the magnet or screws.

Suitable for any single handed operation in particular for end-grain work. The low angle plane cutter ensures minimal vibration giving an excellent finish on many man made materials such as plastic laminates. Adjustable 40mm width steel cutting blade with ground base and sides for smooth planing. Large screw for accurate adjustments.

With tough enamelled alloy bodies and high carbon heat treated steel blades. Flat File - Straight Handle For straight filing with flat blade as standard. Plastic handle. Blade length: 255mm. Blade width: 40mm. Overall length: 395mm.

Hardened and tempered blade. Designed to cut chipboard, blockboard, timber, plywood, hardboard, plasterboard and laminates. Specially hardened teeth to stay sharp longer. Tough handle with fingerline for comfort and accuracy. 8 points per inch.

Has file sharpened teeth with plain hardened cutting edges. Impact resistant handle. High quality. 13 points per inch.

Suitable for precise cutting in confined areas or around obstructions. Flexible alloy steel blade, which cuts on the pull stroke. Polished rosewood handle with brass ferrule. 20Tpi.

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

Applications:

For ripping hard and soft woods like Beech, Pine, Belu etc, in gang saw

Applications:

For sizing and trimming soft, hard, Exotic Wood, Plywood and Raw Particle Board across the grain

Applications:

for exotic timbers, solid or veneered or cutting veneers in packs with grain. For sizing cuts in aluminium extrusion of up to 10mm wall thickness as well as plastic extrusion. Also used for sizing sheet aluminium or plastic. A constant feeding speed of the material is recommended.

Applications:

For Veneer Industries and Match Industries.

For Czech Peeling Machines, Cremona Machines, Mihoma Machines, Bharat Machines, Ply Machines ISGEC machines are standard. Available with holes and slots, sharpened, ready to use knives. In following sizes:

Standard for Match Industries:

For all types of Machines as per customer's Specification and drawings.

Applications:

Specially used in particle Board Mills, Chip boards and paper pulp Mills

Standard Machines:

Pallamann, Clockner, Pessa, Windsor, Tata, KMW, Voith, Wigger, L & T & others.

Generally made as per the machine and Model of the Machine. Various Lengths, Widths & thicknesses are possible

Applications:

Specially used in particle Board Mills, Chip boards and paper pulp Mills

Standard:

Generally made as per the machine & model.

Various Lengths, Widths & thicknesses are possible.

Tungsten Carbide Tipped Saws are produced in modern Computer Numerically Controlled (CNC) plant. TCT Circular Saw for Wood/Plastic application and for Non-Ferrous application can be offered from 3" Dia onwards upto 20" Dia, for both solid and hollow section cutting. Dimensional and structural properties of Tungsten Carbide Tipped Circular Saws are kept within close tolerance limits. Each Saws blank is precision ground to ensure perfect parallelism and balance. The Saw-Teeth are brazed with highest quality Tungsten Carbide Tips having grades, as per the end application, required. The tips are ground meticulously on state-of-the art machine. The latest product range, in this variety, is saw having teeth with -ve rake angle, suitable for burr free cutting of aluminium sections. TCT saws for ferrous cutting including Stainless Steel can be offered, on request.