Power Tools

FS0150

Rubber handle provides grip and operator comfort. Can be used for wet sanding. Self generating vacuum, attached to a Portable Dust Collection System helps reduce airborne dust and clean-up time. Rotating air inlet prevents the air hose tangle. Speed control conveniently located for easy adjustment. Ball bearing construction for a long tool life.

 

• Backing pad size: Ø 150mm (6”)

• Orbit diameter: 5mm (3/16”)

• Spindle size: 5/16” NPT

• Air inlet thread: 1/4” NPT.

• Minimum air hose size (ID): 3/8” (10mm).

• Air pressure: 90PSI/6.3Bar.

• Air consumption: 3CFM* (85 ltr/min).

• Sound pressure level: 84 dba.

• Sound power level: 90 dba.

• Vibration level: 5.6 m/s2.

• Overall length: 280mm.

• Weight: 1.04kg

RP1875

For blind rivets with 2.4mm, 3.2mm, 4.0mm and 4.8mm nozzles. Adjustable safety tap controls ejected pins, 3/8"x24 male spindle thread.

Constructed from heavy gauge steel for heavy duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning. GS and TUV approved.

 

 

IW500

One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 4cfm* air consumption, 16mm bolt capacity.


Overall length: 191mm.

Based on a 15 second cycle per minute average use.


IW750

One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4” NPT air inlet thread for 10mm air hose, 25mm bolt capacity. 90psi air pressure, 7.5cfm* air consumption 500ft/lbs torque.


Overall length: 245mm.

Based on a 15 second cycle per minute average use.

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

 

 

Spares:

 

 

 

Standard Timing Light


For checking and setting ignition timing on automotive, agricultural and marine engines. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 135cm long durable power leads. Impact resistant housing. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides concentrated light. Easy to apply inductive impulse pick-up.


Advance Timing Light

For checking and setting ignition timing on automotive, agricultural and marine engines. Measures ignition spark advance from 0-60. For use on 12V systems. Reverse polarity protected. Accurate to 8,000rpm. 1m long removable coiled power leads. Impact resistant metal case and rubber nose cone. On/off trigger switch. Bright linear Xenon flash tube for daylight use. Focused lens provides a concentrated light. Easy to apply inductive impulse pick-up. Built-in check light.

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

Made from heavy duty steel with a rubber saddle which provides a positive grip and prevents damage to jacking points. Designed to safely raise vehicles. Easy to use and compact for easy storage. Lifting range: 88 - 383mm. 1 Tonne (1000kg) safe working load. Wide base plate for extra stability.

Base plate size: 150 x 90mm. Spindle thread 12.5 x 2.5mm.

Supplied in a high quality fitted blow moulded impact resistant case. Drop forged, high carbon steel hammers with ground and polished heads and cheeks. Hickory, octagonal section shafts.

• 1x: curved, utility, heel and toe dolly.
• 1x: 12oz shrinking hammer, and flat faced bumping hammer,
• 1x: 10oz round finishing pick.

Rugged construction with an internal overload valve, a pressure rating of 10,000psi (700bar) and a 1/4 NPT thread size. Operates in a vertical and horizontal position.