Pneumatic Tools

FPD375

Suitable for drilling and screw driving. Rubber handle provides grip and operator comfort. 10Mm keyless chuck. Stall resistant. Short gear case design. Heavy duty gearing system with oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Air inlet thread: 1/4” NPT. Minimum air hose size (ID): 3/8” (10mm). Air pressure: 90PSI/6.2Bar. Air consumption: 3.35CFM*. Sound pressure level: 95 dba. Sound power level: 100 dba. Vibration level: 0.7 m/s2. Overall length: 188mm.

 

 

 

DAR1510

10mm Jacobs chuck fingertip control of reverse, reverse exhaust, overall head height 94mm, 3/8"-24 spindle thread.

FDG180M

For polishing buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Speed regulato. Safety release throtte. Rear exhaust. Ball bearing construction for long tool life.

GD2808L

For precision engineers, mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight, 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption. Collet size: 6mm. Overall length: 120mm.

GD2206L

1/2 HP motor for polishing, buffing and grinding, reverse exhaust, 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption. Collet size: 6mm. Overall length: 170mm.

 

 

GDA2206L

Safety lever throttle, reverse exhaust, Ideal for polishing, grinding and buffing, suitable for use In confined areas, 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption. Collet size: 6mm. Overall length: 160mm.

 

 

 

FSR375 3/8” square drive. Working torque range: 5 - 20ft.Lbs (7 - 27Nm). Overall length: 205mm. Free speed 200rpm.

FSR500 1/2” square drive. Working torque range: 10 - 50ft.Lbs (14 - 68Nm). Overall length: 265mm. Free speed 150rpm. Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.

 

 

SR375 3/8” square drive, 10mm bolt capacity. SR500 1/2” square drive, 13mm bolt capacity. Ball type retainer, disc type reversing action, compact, lightweight design, ideal for automotive work, front exhaust.

 

• Air inlet thread: 1/4" NPT

• Minimum air hose size (ID): 10mm (3/8")

• Air pressure: 6.2bar (90psi)

• Air consumption: 113Ltr/m (4cfm)

• Free Speed: 150rpm

• Torque: 50ft/lbs

• Overall length: 255mm.

HPHP2090K

Supplied with flat chisel, spot weld breaker, taper punch, rivet cutter and sheet metal cutter. Hard hitting long stroke. Accepts all standard 0.401” shank tools. 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption. Stroke length: 90mm. Overall length: 230mm.

NS4030

10 needles for quick removal of rust, paint, scale, flux and corrosion. Slimline body. Lightweight. 1/4” NPT air inlet thread for 10mm air hose, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption. Needle diameter: 3mm. Overall length: 250mm.

BS920L

Produces burr free cuts without distortion. Ideal for body shop and sheet metal work. Teasing throttle for precise control, 1/4” NPT air inlet thread, 90PSI (6.3 bar) air pressure, 4CFM* (144 ltr/min) air consumption and a cutting capacity of 1.6mm (steel) to 2mm (aluminium). Overall length: 235mm.