Unique Enterprises
Unique Enterprises
Mumbai, Maharashtra
Send E-mail
Send SMS
Home  » Our Products  » 

Measuring Instruments


Pioneers in the industry, we offer vernier caliper, dial caliper, digital caliper, micrometers, digital micrometer and dial thickness gauge from India.

REQUEST CALLBACK
Ask for Price

Give four types of reading, inside, outside, depth and step. Dual reading scale (metric and inch) with 14° bevelled vernier scale for reduced parallax reading error, fine adjustment assembly and knurled locking nut. Manufactured from hardened stainless steel for rigidity with satin finish. Conforms to DIN 862.

5"/130mm VERNIER CALIPERFINE ADJUSTMENT
7"/180mm VERNIER CALIPERFINE ADJUSTMENT
11"/280mm VERNIER CALIPER FINE ADJUSTMENT
18"/455mm VERNIER CALIPER FINE ADJUSTMENT
24"/605mm VERNIER CALIPER FINE ADJUSTMENT
STANDARD 6" VERNIER
STANDARD 8" VERNIER
STANDARD 12" VERNIER
 

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Rack covers prevent dust from fouling teeth of racks. All measuring faces are precision ground and micro lapped for absolute inside, outside, depth and step readings. Manufactured to DIN 862.

150mm DIAL CALIPER READING 0.05mm
200mm DIAL CALIPER READING 0.05mm
300mm DIAL CALIPER READING 0.05mm
 

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

ecision ABSolute digital calipers have a thumb wheel for precise movement and a useful locking screw for checking repeat measurements. A measurement can be converted between inch/metric at the touch of a button. Non-output type.
ABSolute Measurement Function - The zero point once set is fixed until changed, even if the caliper is turned off (unless the battery is removed). Incremental mode can be achieved for repeated use of Go/No-Go measurement. 
Resolution: 0.01mm/0.0005”.
Extra batteries available -

6"/150mm SPC DIGIMATIC ELECTRONIC CALIPER
8"/200mm SPC DIGIMATIC ELECTRONIC CALIPER
12"/300mm SPC DIGIMATIC ELECTRONIC CALIPER
6"/150mm DIGITAL ABS ELECTRONIC CALIPER
8"/200mm DIGITAL ABS ELECTRONIC CALIPER
12"/300mm DIGITAL ABS ELECTRONIC CALIPER

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

With enamelled frame and tungsten carbide tipped anvils. High quality fitted metal case with adjusting spanner. Sizes 25 - 50mm/1 - 2” and over supplied with setting standard. Manufactured to BS 870. All supplied in a impact resistant fitted plastic case.

0-25mm EXTERNAL MICROMETER
25-50mm EXTERNAL MICROMETER
50-75mm EXTERNAL MICROMETER
75-100mm EXTERNAL MICROMETER
100-125mm EXTERNAL MICROMETER
125-150mm EXTERNAL MICROMETER
150-175mm EXTERNAL MICROMETER
175-200mm EXTERNAL MICROMETER
200-225mm EXTERNAL MICROMETER
225-250mm EXTERNAL MICROMETER
250-275mm EXTERNAL MICROMETER
275-300mm EXTERNAL MICROMETER
 

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

xford external digital micrometer with large digital display, quick response speed and zero set at any point. Metric/inch measurement. Can be connected to a PC serial port via the SPC cable (supplied separately). IP65 rating.
• Easy handling
• mm/Inch measurements
• Ball end cap for measuring curved surfaces
• Large digital display
• Quick response speed
• Zero set at any point
• IP65 rating

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

For quickly measuring the thickness of paper, film, leather, rubber etc. The spindle is moved using the thumb lever. With adjustable bezel. Measuring faces are made of high grade tool steel, hardened, ground and lapped for accuracy. Thumb lever raises spindle to allow for workpiece insertion.
Specifications: 
Range: 0 - 10mm. 
Graduations: 0.01mm. 
Throat depth: 30mm.
Accuracy: +/-0.02mm.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Features: Easy to use with clear digital LCD display. Large, easy-read 7.5mm LCD display. Soft-key touch for operator comfort, superior construction quality. 
Response speed: <0.5m/s. 
Auto power off.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Easy handling with mm/inch measurement, large digital display. External readings with zero set at any point fitted with a thumb wheel for greater accuracy.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

With four magnetic faces, one at 45°. Universal clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 5/16" and 3/8".
Base dimensions: 48 x 44 x 51mm.
Column height x dia.: 175 x 12mm.
Crossbar x dia.: 165 x 10.0mm.
Clamp ring: 6.35mm.
Magnetic pull: 30kg.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A ‘datum point’ can be set by using a setting ring of a known diameter or a micrometer. ‘ Zero’ the gauge to this datum point by rotating the bezel to align ‘zero’ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ‘rocking’ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes. 

18-35mm DIAL BORE GAUGE
35-50mm DIAL BORE GAUGE
50-150mm DIAL BORE GAUGE
 

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Fully hardened and ground datum faces to resist wear. Centrally mounted protractor vial allows unrestricted viewing. Precision rules with deeply etched graduations on both sides or ease of reading and long life. Protractor has full 360° scale plate, graduated 0 - 180° - 0, includes vial. Square head offers the following fixed angles: 45° and 90°. Centre head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

The ideal STABILA laser distance measurer for all who want to take a lot of measurements indoors: Illuminated displayLarge figuresAccuracy of measurement typically 2 mmEasy to handleAll the basic functionsProtection class IP 40 Types of Laser Distance Measurer: LD 520LD 420LD 320

Yes! I am Interested


Ask for Price

Edison Relative Humidity & Temperature Tester

THM150
This multimeter is ideal for temperature, humidity and dew point testing in residential and commercial environments such as offices, storeroom’s, greenhouses and places where a 
controlled environment is essential. 
Conforms with EN61326-6: 2006 and EN61326-2-2: 2006. 
Meter capabilities: 
• Testing temperature: -10 ~ 50°C (14 to 122°F). 
• Testing humidity: 0 ~ 100%RH. 
• 4 digit clear LCD display with optional back light.
• Data hold function. 
• Auto power ‘OFF’ and low power indicator. 
• Battery operated - DC1.5V 3x AAA (included). 

Functions: Data hold, LCD display with optional backlight and Auto power-off.
Pack includes: Meter, head cover, wrist strap, carry case, DC1.5V x 3 AAA batteries
(installed). Instruction manual.
Dimensions (W x D x H): 60 x 30 x 121mm.
Gross weight: 140g.Specification:
PropertyValue
WEEE CompliantYes
UNSPSC Code41112301
eCl@ss Code27200901
BrandEdison
Supplier Part No.VA8010
Model NumberTHM150

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Edison Auto Range 1000A AC/DC Digital Clamp Meters - DCM070

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM070
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power ‘OFF’ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle,
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606gSpecification:
PropertyValue
WEEE CompliantYes
UNSPSC Code41113637


Supplier Part No.DCM070
Model NumberDCM070

Yes! I am Interested


Ask for Price

Edison Airflow, Velocity & Temperature Tester

TVA150
This meter is for measuring airflow and temperature. It is ideally used to measure the air speed at ventilation outlets and to test temperatures in residential and commercial environments such as offices, storeroom’s, greenhouses and places where climate conditions can be analysed. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006. 
Meter capabilities: 
• Measuring wind/airflow in: m/s, km/h, fpm, mph, kts. 
• Beaufort scale. 
• Temperature in both °C and °F. 
Testing ranges: 0.4 ~ 20m/s, 80 ~ 4000fpm, -10 ~ 50°C (14 ~ 122°F). 
• 4 digit clear LCD display with optional back light. 
• Data hold function. 
• Auto power ‘OFF’ and low power indicator. 
• Battery operated - DC1.5V 3x AAA (included).Specification:
PropertyValue
WEEE CompliantYes
UNSPSC Code41114401
BrandEdison
Supplier Part No.VA8020
Model NumberTVA150

Yes! I am Interested


 






Corporate Brochure



X

 

 

Send SMS
Unique Enterprises
Shabbir Patanwala  (Proprietor)
No. 155, Narayan Dhru Street Shop No. 6, Ground Floor
Mumbai - 400003 , Maharashtra , India
Send E-mail