Engineers Hand Tools

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

Cupped and bevelled precision ground points provide accurate positioning over the nail head for efficient depression. Manufactured from hardened and tempered steel, with a knurled body for extra grip. Conform to BS 3066. (Hardness: heads 42 HRC. Max: points 52 - 58 HRC). Overall length: 100mm (4”).

Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.

Manufactured from chrome vanadium steel. Used for punching out pins and dowels

Wooden contoured handles with high grade steel blades, hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots from a surface which has been previously machined or filed.

Includes straight pick, full hook, 90° hook and 45° hook. Ideal for use on cotter pins, keys, ‘O’ rings, springs and washers. Hardened and tempered chrome vanadium steel shanks with a knurled section for precise grip. Impact resistant square section handles for secure grip even when greasy. Overall length: 120mm - 130mm (43/4” - 51/8”)

 

4 prong steel retractable claw. Flexible steel stem with a spring loaded plunger to open and close jaws. Chrome plated and corrosion resistant. Ideal for recovery of small objects.

 

 

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist’s standard type, double ended, which are mainly used in conjunction with surface gauges.

Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless.
Round End - Flexible Blade
Round End - Rigid Blade
Square End - Flexible Blade
Square End Rigid Blade  

English Type Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.

Manufactured from hardened and tempered steel, with chrome plated high polish finish. Switchable between forward and reverse coupled with the multi-positional sliding T-bar makes this tap wrench ideal for use in confined spaces. Individually boxed.

Replacement Jaws

 

 

Contents:
6” spring divider, 6” internal
caliper and 6” external caliper.

Onsists of a chuck body & four contact arms. Designed to check run out or concentricity, straightness & alignment. Will indicate the position of datum point on a component or fixture from central line of a machine spindle . suitable for use on drill presses lathe , milling machines morers etc.

Manufactured from hardened steel with a satin finish. An ideal way to quickly measure the diameter of drills and steel wire. 1.5 - 12.5mm with Drill Rod Gauge 30 holes for measuring drills from 1.5 - 12.5mm, with metric sizes and decimal equivalents.

 

 

Manufactured from hardened and polished steel to check BA, Whitworth and BSF, Acme and American Screw Threads. Angles: 60° American and Metric, 55° Whit and BSF, 471/2° BA and 141/2° ACME.

 

 

 

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered steel. 1mm increments. Rustless. Constant at 20°C. Satin chrome anti-glare finish. Permanent black figures and graduations.

 

 

Quality industrial with hardened and polished taper blades, enclosed in a steel case. Blades are clearly marked for easy identification.

With knurled satin finish bodies providing positive adjustment of the hardened and radius ground plungers ensuring accurate measurement of the internal diameter when used with a micrometer. For smaller diameter measurements use the small hole gauge. Set of 6 Supplied in a size marked PVC storage wallet, with stud fastening. Contains 1 of each size A - F inclusive.

 

 

Plain Type Depth Gauge Designed for measuring flat based recesses. Consisting of a precision ground steel rule and body which are positioned at 90° to each other. The body has precision ground locating faces, with a knurled adjusting/ securing nut.

For holding metal items such as nuts, bolts, washers etc. Dish For use in high and confined spaces with rubberised magnetic base mat to protect work surface.

 

Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.

Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc.

Designed for maximum grip under load application. The red moulded cushion grip gives optimum operator comfort. Ideal for assembly work. Tough alloy steel blades, satin finish with hardened and ground tips prolong tool life.

Manufactured from hardened and tempered chrome vanadium steel with corrosion resistant chemically blacked finish. Vinyl grip for improved comfort and control. Replaceable soft grip plastic inserts allow delicate or finished components to be gripped without damage. Eight position groove with spring loaded rapid jaw adjustment. Overall length: 250mm. Capacity: 40mm.

Dissipative handles safely discharge any electrostatic energy, reducing possibility of damage to sensitive items. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip.

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.

Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied. With convenient hanging hole in the handle for storage.

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Magnetic Tooling

1) Bar Magnets
2) Button Magnets
3) Shallow Pot Magnets
4) Deep Pot Magnets
5) Shallow Hold Fast
6) Magnetic Hold Fast
7) Magnetic Pic Up Tool
8) Magnetic Pick Up Wand
9) Magnet Pick up Sweeper
10) Magnetic Long Reach
11) magnetic Holder
12) Magnetic Vee Block 

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc. For use with 3/8” square drive tools.

5 Piece Set

Used for precision work on a number of applications. Spring tensioned pliers suited for repetitive use. Fitted with slip-resistant PVC cushion grip handles and heat treated stainless steel blades.

The wide jaws distribute the clamping force evenly to prevent damaging the workpiece being handled.

Industrial quality chrome vanadium steel, chemically blacked. Particularly useful for engineers and electricians. Serrated jaws for gripping nuts, bolts, studs etc.

The wide jaws distribute the clamping force evenly to prevent damaging the workpiece being handled.

Used for gripping round and irregular shaped items, tubes and piping. Ideal for oil filters, hot radiator caps and hub caps. Both types suitable for 60 - 140mm diameters. Strap Type: Hardened chrome vanadium handle with industrial strength, rubber strap that will not mark or scratch workpieces. Chain Type: Hardened chrome vanadium handle with heavy duty chain for a positive grip.

 

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.

Manufactured from specially selected steels. The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. These are manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Double polished head and joint. Induction hardened cutting edges. Especially suitable for production line environments where repetitive work is undertaken.

Different types of Cable Cutters

1) light duty cable cutters

2) Heavy duty cable cutters

3) Ratcheting cable cutters

4) Ratchet type cable cutters

5) Lever type cable cutters

A range of folding pliers with ‘pen-knife’ style blades. Featuring knives, can/bottle openers, metal/wood files (single and double cut), screwdrivers, chisels, saw blades, rules, wire benders, fish scalers, hook removers etc. Ideal for maintenance engineers, DIY enthusiast, fishermen and hobbyists. Manufactured from the finest quality steel.

Rolled chrome vanadium steel bodies, drop forged hardened steel jaws with corrosion resistant bright nickel coating. The jaw opening and clamping pressure can be adjusted with the knurled head screw, fitted with wire spring to ensure efficient opening of the jaws. The locking mechanism holds the wrench in place once adjusted, leaving both hands free.

Industrial quality chrome vanadium hardened and tempered. PVC cushion g

Made from high quality chrome nickel steel with induction ground cutting edges. Double dipped PVC grips for user comfort and control. Used for delicate, fine and accurate work in a continuous production environment. Spring loaded return for quick repetitive opening and operator comfort.

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades. All with attractive chromed handles.

A fully insulated screwdriver VDE tested up to 1000V. Professional high grip handles, magnetic tips, chrome vanadium steel blades.

Double polished head and joint with hardened steel jaws. The dual material grip handle manufactured with a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip. Ideal for environments where repetitive work is undertaken. Joint protector stops the handles closing together, preventing trapped fingers.

Contoured steel handles with vinyl grip for improved comfort and control. Heavy duty blades manufactured from tempered and hardened high carbon steel with polished finish. Spring loaded cutting action for easy one handed operation with safety lock to keep jaws closed when not in use.

Drawn carbon steel nickel plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Chrome vanadium steel blades with magnetic tips. Acrylic handles.

Single Hex. Manufactured from chrome vanadium steel. For use in restricted areas.

 

 

Induction hardened cutting edges. Used for twisting and cutting wire in the construction industry. Ideal for general gripping especially thin materials.

Expert Quality, hardened and tempered chrome alloy steel blades with black tips fitted with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied.

With a traditional ‘fluted’ design handle. The high quality steel blades are hardened and ground with a satin finish. This range offers the widest choice of blade selection and blade length. The high impact plastic handles are acid and oil resistant. A comprehensive selection to meet the demands of modern industry.

The convex jaw shape allows clearance around small obstacles and the broad jaw profile ensures that flat workpieces are clamped securely.

Provides smooth piercing with minimum effort. For use on steel, aluminium, plastic and leather. Adjustable depth gauge. Suitable for materials up to 14 gauge. Die and punch sizes: 2.38, 3.18, 3.97, 4.76, 5.56, 6.35, and 7.14mm.

Manufactured from chrome vanadium steel with a highly polished chrome plated finish.

 

 

High power magnet for easy pick up and release of metal objects. Can be used for scrap and ferrous debris. Spring loaded magnet release. Permanent magnet, never needs to be re-magnetized.

 

 

Parallel PIn Punches
Taper Punches
Long Parallel Pin Punches With Air Grip
Automatic Centre Punches
nail Punches
Square Head Centre Punces  

9 Piece Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron. Contents: T8, T9, T10, T15, T20, 25, T27, T30 and T40.

 

 

page { margin: 0.79in } TD P { margin-bottom: 0in } P { margin-bottom: 0.08in } -->

Volt-tested to ensure safety on or near electrical equipment upto 1000 volts AC or 1500 volts DC.

Conforms with DIN 7438 and DIN EN 60900.

Set Contents: No. 0x75, No. 1x100, No. 2x100mm, 2.5x85, 4.0x100, 5.5x100, 6.5x150mm

For holding larger with rubberized magnetic base mat to protect work surface.

Made from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching edged holes in leather, wood, plastics, card and paper. Supplied in hardwearing PVC wallet with tie fastening.

Contents : 6mm (1/4"), 8mm (5/16"), 10mm (3/8"), 12mm (1/2"), 16mm (5/8"), and 19mm (3/4").

Chrome vanadium steel blades with magnetic tips. Fitted with a unique dual grip triangular handle which has been designed with for improved user comfort.

6 Piece Set Contents (mm):

Crosspoint : No. 1x75, No. 2x100. Flared 6.3x100, 8.0x200. Parallel : 5.0x75, 5.0x150

12 Piece Set Contents (mm):

Crosspoint: No 2xstubby, No. 1x75, No. 2x100, No. 3x150

Przidriv : No. 2x100, No. 3x150

Flared : 6.3xstubby, 6.3x150, 8.0x200

Parallel : 5.0x75, 5.0x150, 5.0x250

Ball and socket universally positional joints, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.

With high power magnet and pocket clip.

All have wooden contoured handles with high grade steel blades which are hardened and tempered with extremely keen cutting edges. Scrapers reduce high spots by removing minute amounts of metal from a surface which has been previously machined or filed. Contents: 1 each 100mm three square, half round and 205mm flat.

 

 

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc.

4 Pieces Set Contents
3.0mm x 210mm (8 18 184")
4.0mm x 215mm (8 1/2")
5.0mm x 225mm (9")
6.0mm x 240mm (9 1/2")

Heavy duty steel frame with front grip and ‘D’ style handle with grooved slip resistant rubber inlay for positive control and comfort. Wing nut and lever blade tensioning. The blade can be set at 45° to the frame to allow flush cutting. Supplied with all hard HSS blade, 300mm (12”).