Electric Hand Sander

For fine finishing of bodywork etc. Complete with 2 metre dust removal hose. Supplied with foam backed pad. Self vacuuming dust shroud system connects to 30mm inside diameter dust extraction unit, 600A hole pattern.

• Backing pad size: Ø 150mm (6”)

• Orbit diameter: 5mm (3/16”)

• Spindle size: 5/16” x 20 NPT

• Air inlet thread: 1/4” NPT.

• Minimum air hose size (ID): 3/8” (10mm).

• Air pressure: 90PSI/6.3Bar.

• Air consumption: 4CFM* (144 ltr/min).

• Sound pressure level: 88 dba.

• Sound power level: 96 dba.

• Vibration level: 7.3 m/s2.

• Overall length: 125mm.

• Weight: 1.80kg

For use on wood, metal, plastics, fibre glass, fillers etc. Connects to 10mm hose, dust extraction, adjustable speed regulator, low noise, vibration damped,

• Overall length: 175mm.

• Pad size: 165 x 90mm.

• Sheet Size: 93mm x 230

• Air inlet thread: 1/4” NPT.

• Minimum air hose size (ID): 3/8” (10mm).

• Air pressure: 90PSI/6.3Bar.

• Air consumption: 4CFM* (144 ltr/min).

• Sound pressure level: 91 dba.

• Sound power level: 105 dba.

• Vibration level: 16.6 m/s2.

• Overall length: 175mm.

• Weight: 1.80kg

Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler.

• Free speed: 18,000rpm

• Air inlet thread: 1/4" NPT

• Minimum air hose size (ID): 10mm (3/8")

• Air consumption: 4CFM* (113ltr/min).

• Air pressure: 90PSI/6.3Bar.

• Motor power: 0.6hp

• Sound power level: 92dBA

• Sound pressure/noise level: 84dBA

• Vibration level: 0.8m/s2

• Overall length: 390mm

• Net weight: 1.36kg

Kit Contents: Surface preparation file belts: 20mm P80 grit (coarse), 13mm P300 grit (fine)

Aluminium oxide file belts: 20mm P60 grit, 20mm P80 grit, 13mm P80 grit, 13mm P120 grit, 10mm P120 grit, 10mm P150 grit, 6mm P150 grit.

Contact arms; 6mm, 10mm, 13mm, 20mm contact arm with flat roller. 10mm contact arm with rounded roller 4mm hexagon key L-wrench

Slimline design for access into confined spaces. Ideal for flat, concave and convex surfaces. Rear exhaust (complete with silencer), 1/4” NPT air inlet thread for 10mm air hose, 85PSI (5.95 bar) air pressure, 14.2CFM* (211 ltr/min) air consumption. 16,000rpm free speed. 13mm Mini Belt Sander

• Overall length: 870mm.

• Height: 50mm.

• Belt size: 13 x 610mm.

• Weight: 1.0kg.