Drilling Tools

IWS500

Kit supplied complete in robust blow-moulded case. Includes: 1/2” impact wrench IW500. 10 metric sockets: 9, 10, 11, 12, 13, 14, 17, 22, 24 and 27mm. Threaded tailpiece, in-line mini-oiler and oil bottle. One piece aluminium housing, 10 position power regulator, thumb switch for reversing.

 

• Bolt Capacity: 16mm

• Torque: 300ft/lbs

• Air inlet thread: 1/4” NPT.

• Minimum air hose size (ID): 3/8” (10mm).

• Air pressure: 90PSI/6.3Bar.

• Air consumption: 4CFM* (144 ltr/min).

• Sound pressure level: 93 dba.

• Sound power level: N/A dba.

• Vibration level: 1.21 m/s2.

• Overall length: 191mm.

 

DP2210

10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8", 24 spindle thread.

DP513

13mm Jacobs chuck, high reduction gearbox, high torque, with side handle, 1/2HP motor 3/8"-24 spindle thread.

DS4510L

10mm Jacobs chuck, stall-resistant, safety lever throtte, high performance, planetary gearing, 3/8" - 24 spindle thread.

DP2610

Hammer finish casing, 10mm Jacobs chuck, stall resistant, directional front exhaust, needle bearing gears, 33/8", 24 spindle thread.

Suitable for industrial and commercial production and assembly applications. Side handle for two handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and 3 position power regulator. Top venting exhaust. Oiling points for daily maintenance. Safe working pressure: 90psi (6.2 bar). 1” Sq. drive.

 

• Free Speed: 3,300rpm

• Final Drive: 1” (25mm) HEX

• Working Torque: 2,030Nm (1500lb.ft)

• Maximum Torque: 2,300Nm (1700lb.ft)

• Air inlet thread: 1/2” NPT.

• Minimum air hose size (ID): 1/2” (13mm).

• Air pressure: 90PSI (6.3Bar).

• Air consumption: 0.8CFM

• Sound pressure level: 87 dba.

• Sound power level: N/A dba.

• Vibration level: 5.9 m/s2.

• Overall length: 500mm.

• Weight: 9.34kg

IWP100-X

Suitable for industrial and commercial production and assembly applications. Front or rear mounting spring balance loop. Easy to use forward/reverse switch and 3 position power regulator. Forward facing exhaust. Oiling points for daily maintenance.

 

• Free Speed: 3,400rpm

• Final Drive: 1” (25mm) HEX

• Working Torque: 2,170Nm (1600lb.ft)

• Maximum Torque: 2,440Nm (1800lb.ft)

• Air inlet thread: 1/2” NPT.

• Minimum air hose size (ID): 1/2” (13mm).

• Air pressure: 90PSI (6.3Bar).

• Air consumption: 0.8CFM

• Sound pressure level: 87 dba.

• Sound power level: N/A dba.

• Vibration level: 5.9 m/s2.

• Overall length: 295mm.

• Weight: 9.70kg

IW750

One piece aluminium housing, 10 position power regulator, thumb switch for reversing.

 

• Bolt Capacity: 25mm

• Torque: 500ft/lbs

• Air inlet thread: 1/4” NPT.

• Minimum air hose size (ID): 3/8” (10mm).

• Air pressure: 90PSI/6.3Bar.

• Air consumption: 7.5CFM* (270 ltr/min).

• Sound pressure level: 83 dba.

• Sound power level: N/A dba.

• Vibration level: 0.449 m/s2.

• Overall length: 245mm.

Produce good quality holes in a wide variety of materials, using either

a bench drill or light pedestal drilling machine. Each tool cuts

concentric holes in a range of specific sizes.

For material up to 1/8” (3mm) thick.