|
|
|
WUD TOOLS
Wud Tools speacialize in cutting tools made from varied materials; from
plain carbon steel to alloy steel to HSS to Tungsten Carbide to Diamond
to poly crystalline Diamonds. The range in circular tools start from 25
mm dia and goes upto 1200 mm dia. And ranges of straight tools start from
as small as 18.75 mm to 4000 mm.
Tungsten Carbide
Tipped Saws
Tungsten Carbide
Tipped Saws are produced in modern Computer Numerically Controlled (CNC)
plant.
TCT Circular Saw for Wood/Plastic application and
for Non-Ferrous application can be offered from 3" Dia onwards upto
20" Dia, for both solid and hollow section cutting.
Dimensional and structural properties of Tungsten Carbide Tipped Circular
Saws are kept within close tolerance limits.
Each Saws blank is precision ground to ensure perfect parallelism and
balance.
The Saw-Teeth are brazed with highest quality Tungsten Carbide Tips having
grades, as per the end application, required. The tips are ground meticulously
on state-of-the art machine.
The latest product range, in this variety, is saw having teeth with -ve
rake angle, suitable for burr free cutting of aluminium sections. TCT
saws for ferrous cutting including Stainless Steel can be offered, on
request.
Rip
Saws
 Applications:
For ripping hard and soft woods like Beech, Pine, Belu etc, in gang
saw
| |
Dia
|
Kerf
|
No
of teeth
|
|
|
200
|
2.0,
2.4, 2.8, 3.2
|
30,
42, 48
|
|
250
|
2.0,
2.4 2.8, 3.2
|
40,
48
|
|
300
|
2.4,
2.8, 3.2
|
36,
48
|
|
350
|
2.8,
3.2
|
42,
54
|
Top
Cross
Cut Saws/DD Saws
Applications:
For
sizing and trimming soft, hard, Exotic Wood, Plywood and Raw Particle
Board across the grain
| |
Dia
|
Kerf
|
No
of teeth
|
|
|
300
|
2.8, 3.2
|
34,
42, 48
|
|
350
|
2.8, 3.2
|
54,
84, 96, 108
|
|
400
|
3.2, 3.5
|
60,
72, 96, 108, 128
|
|
450
|
3.2, 3.5
|
96,
108, 128
|
Top
Special
Thn Kerf Saws
Applications:
For Exotic Timbers, solid or veneered or cutting veneers in packs with
grain.
For sizing cuts in Aluminium Extrusion of up to 10mm wall thickness as
well as Plastic Extrusion.
Also used for sizing sheet aluminium or plastic.
A constant feeding speed of the material is recommended.
| |
Dia
|
Kerf
|
No
of teeth
|
|
|
150
|
1.5, 1.7, 2.0
|
24,
48
|
|
200
|
1.75, 2.0
|
36,
48
|
|
250
|
1.8, 2.0
|
36,
40, 48
|
Top
Saw Blades for Non-Ferrous Metals &
Rigid Plastics
Applications:
For use on saw benches, radial arm saws and snipper saws.
For sizing cuts in Aluminium Extrusion of up to 10mm wall thickness as
well as Plastic Extrusion.
Also used for sizing sheet aluminium or plastic.
| |
Dia
|
Kerf
|
No
of teeth
|
|
|
200
|
2.8, 3.2
|
48,
60
|
|
250
|
3.2, 3.5
|
40,
60, 80
|
|
300
|
3.2, 3.8
|
72,
84, 96
|
|
350
|
3.8, 4.0
|
60,
84, 108
|
|
400
|
4.2
|
96,
108, 128
|
|
450
|
4.0,
4.4
|
80,
120
|
|
500
|
4.0
|
96,
120
|
|
550
|
4.0
|
52,
60, 72
|
|
600
|
4.0
|
60,
72
|
Sizes
above 600 Dia upto 1020 mm available on request as per specification.
Top
Veneer
Knives
Veneer
Peeling Knives
Applications:
For Veneer Industries and Match Industries.
For Czech Peeling Machines, Cremona Machines, Mihoma Machines, Bharat
Machines, Ply Machines ISGEC machines are standard. Available with holes
and slots, sharpened, ready to use knives. In following sizes:
|
108"
X 7" X 5/8"
|
|
108"
X 6" X 5/8"
|
|
56"
X 7" X 5/8"
|
|
56"
X 6" X 5/8"
|
Standard
for Match Industries:
|
Length
: 46", 42", 36", 32",
30", 28", 18", 14".
|
|
Width
: 4", 5", 6"
|
For
all types of Machines as per customer's Specification and drawings.
Top
Veneer Slicer
Knives
Applications:
Used in Veneer Industries for slicing the wood logs.
For Cremona Slicer, Czech Slicer, Tai Hai slicer and capital Slicer.
|
4040
X 265 X 16 mm
|
|
4160
X 265 X 3 mm
|
|
3240
X 260 X 16 mm
|
|
3150
X 240 X 16 mm
|
|
2880
X 260 X 16 mm
|
|
2750
X 240 X 16 mm
|
Materials:
Cladded
Steel of various grades.
Veneer Pressure Bars
For
all the above types of knives made from High grade of steel, Hardened,
Tempered, and ground finish.
Top
Thin Wood Planner Blades
Applications:
Wood Planning
Standards:
|
W
X T
|
W
X T
|
W
X T
|
|
25
x 3
|
30
x 3
|
35
x 3
|
|
L
|
L
|
L
|
|
150
|
150
|
150
|
|
225
|
225
|
225
|
|
250
|
250
|
250
|
|
300
|
300
|
300
|
|
350
|
350
|
350
|
|
400
|
400
|
400
|
|
450
|
450
|
450
|
|
500
|
500
|
500
|
|
600
|
600
|
600
|
Top
Other
Wood Working Knives:
Chipper
Knives for Wood & Bamboo
Applications:
Specially used in particle Board Mills, Chip boards and paper pulp Mills
Standard Machines:
Pallamann, Clockner, Pessa, Windsor, Tata, KMW, Voith, Wigger, L &
T & others.
Generally made as per the machine and Model of the Machine. Various Lengths,
Widths & thicknesses are possible
| Length
|
125mm
to 1130mm |
Width
|
25mm
to 250mm |
Thickness
|
5mm
to 30mm |
Top
Flaker and other Wood working Knives:
Applications:
Specially used in particle Board Mills, Chip boards
and paper pulp Mills
Standard:
Generally made as per the machine & model.
Various Lengths, Widths & thicknesses are possible.
| Length
|
125mm
to 1130mm |
Width
|
25mm
to 250mm |
Thickness
|
3mm
to 30mm |
Top
|
